|
| As
an average gun owner, can I properly apply DuraCoat products without
training? |
| |
Absolutely!
DuraCoat is extremely easy to apply. Anyone can do it. DuraCoat was
designed for the average gun owner. Preheating, baking and blasting are
not required. Expensive, space consuming equipment is not needed. Simply
clean and degrease the surface prior to application.
|
| How
durable is DuraCoat? |
| |
DuraCoat is
permanent. With normal use, a firearm finished with DuraCoat will last
several lifetimes. |
| What
is DuraCoat? |
| |
DuraCoat is
a two part chemical coating. Unlike other firearm finishes, DuraCoat was
created specifically for firearms. Other firearm finishes are
"spin-off's" from other industries.
|
| Is
DuraCoat Teflon based? |
| |
No. Teflon
is a lubricating coating which is great for internals, but will not wear
as well as DuraCoat on the exterior surface of a firearm. DuraCoat's
combination of elasticity and hardness creates a finish impervious to
impact, scratching and the elements. Some users say DuraCoat displays some
lubricating qualities, but this phenomenon was never intended when
DuraCoat was created.
|
| How
do I apply DuraCoat? |
| |
DuraCoat can
be applied by airbrush, conventional spray gun, or HVLP spray gun.
|
| Can
DuraCoat be brushed on? |
| |
No,
absolutely not. DuraCoat is for spray application only.
|
| Will
DuraCoat adhere to hard coat anodizing and Parkerizing? |
| |
DuraCoat
loves hard coat anodizing and Parkerizing as a base. Both processes leave
a good rooting surface for DuraCoat.
|
| How
much DuraCoat is needed to finish one rifle? |
| |
A 4 oz.
container of DuraCoat will coat 1-2 long guns or 2-4 handguns.
|
| Are
the Peel 'n Spray templates reusable? |
| |
Yes. Most
patterns can be used up to 6 times. The MirageFlage pattern is difficult
to reuse because of the many angles. To reuse the template, remove from
the firearm and place on wax paper for future use.
|
| Do
I need a special degreaser? |
| |
Yes. Some
degreasers, especially those used in the automotive industry, can leave a
residue. This residue will form a barrier between the surface and DuraCoat
causing a coating failure. We manufacture TruStrip degreaser solely for
the firearms industry. TruStrip is capable of cleaning the contaminates
commonly found on and in firearms and will not leave a residue.
|
| Do
I need a special solvent to clean my airbrush or spray gun? |
| |
Lacquer
thinner will work, but clean your equipment with DuraCoat reducer
occasionally. This will keep your airbrush or spray gun in top working
condition.
|
| Is
reducing DuraCoat required? |
| |
Depending on
your spray equipment, spray technique, climate and environment your
DuraCoat may or may not need reducing. If your DuraCoat does not lay down
smooth on the surface of your firearm, it most likely needs to be reduced.
Always have some DuraCoat Reducer on hand as it may be required on given
days due to weather conditions. DuraCoat Retarder Reducer cures problems
normally occurring in high humidity weather. One of these high humidity
problems called "blushing" makes the DuraCoat appear cloudy.
Another called "dry spray" occurs when some of the DuraCoat
dries before it reaches the firearm and causes a rough or dusty surface.
|
| Can
I blend DuraCoat colors together? |
| |
Yes. All
DuraCoat colors can be intermixed. With a handful of stock DuraCoat
colors, you can create an infinite number of colors by blending them.
|
| When
is DuraCoat fully cured? |
| |
DuraCoat is
dry to the touch in 20 minutes, can be handled in 1 hour and is ready for
use overnight. Although DuraCoat will gain most of its final hardness,
elasticity and chemical resistance over a 2-3 week period, time will
continue to enhance DuraCoat's characteristics over a lifetime. DuraCoat,
like fine wine, gets better with age. As we say, "DuraCoat wears in,
not out."
|
| How
do I apply DuraCoat to wood? |
| |
Degrease and
lightly sand wood surfaces. Use DuraFil to remove any scratches and dings,
then apply DuraCoat. Allow to dry overnight. Do not bake.
|
| I
hunt along saltwater. Will DuraCoat withstand the salty environment? |
| |
Certainly.
DuraCoat is well suited for salty environments. One of DuraCoat's
attributes is its extreme ability to resist salt corrosion. A firearm
coated with DuraCoat simply will not rust...EVER!
|
| What
is the shelf life of DuraCoat? |
| |
The shelf
life of DuraCoat is 12-18 months if properly sealed and stored in a cool,
dark place. The shelf life of DuraCoat hardener is 6 months, but can be
extended by sealing it in a zip lock bag and placing it in a refrigerator.
|
| Will
DuraCoat burn off my barrel? |
| |
DuraCoat can
withstand temperatures as high has 500-600 degrees F. With
"normal" shooting, your barrel will never get close to being
that hot. If you are fortunate enough to own a transferable machine gun,
or if you like to "blaze" with your semi-auto, do not put
DuraCoat on your barrel, as your barrel temperature will rise to over
1,000 degrees F. In those cases, use DuraHeat. Our DuraHeat coating can
handle temperatures up to 1,800 degrees F.
|
| How
easy is DuraCoat removed? |
| |
Not easy at
all. The elastic nature of DuraCoat resists blasting. A qualified
individual, with the proper blast media, can safely remove DuraCoat
without damaging the surface of the firearm. Be careful. In most cases, we
recommend lightly blasting the surface, being cautious not to remove any
DuraCoat. Just "beat up" the DuraCoat giving it
"tooth" so your new application of DuraCoat has something to
adhere to.
|
| Which
is more durable, DuraCoat or DuraBake? |
| |
Both
DuraCoat and DuraBake are extremely durable. The advantage of DuraBake is
its availability in a convenient aerosol can. The advantage of DuraCoat is
it does not have to be baked and is available in an incredible number of
colors.
|
| How
come other firearm finish manufacturers boast hardness, but make no
mention of elasticity? |
| |
In the case
of firearm finishes, a common misconception is "harder is
better". This is faulty "old school thinking". Hardness
means brittle and brittle means chipping. DuraCoat, being elastic, will
not chip. If your DuraCoat chips, it means you have a preparation problem.
Most likely, the surface was not clean. Elasticity provides protection by
"giving" when confronted with impact. Elasticity also helps
prevent scratches and mars.
|
